Module B: Product Design Considerations, Selection and Specifications for I-Joists and Rim Board® Quiz

Once you have passed and submitted the quiz, you will receive your AIA Certificate of Completion.

Learning Objectives

  • Identify and describe designing for load paths and simple and multiple spans
  • Identify and specify engineered wood products
  • Identify and describe the types of loads on building components
  • Identify and describe deflection and calculated spans of I-joists

 

1. Deflection is defined as:
2. A uniformly loaded beam or joist will have the greatest deflection at the___________.
3. An I-joist that is supported by 3 or more walls is considered what type of span?
4. Which of the following is not an adjustment factor for wood’s strength and stiffness?
5. Vertical load paths should be designed to transfer all forces to:
6. A uniformly loaded beam will have the greatest shear force at the:
7. Structural composite lumber (SCL) includes all the following except:
8. The following is needed to properly specify an engineered wood product:
9. What force(s) should be accounted for when designing structures?
10. The flange of an I-joist should never be cut or notched because it will: